Made for
- Screws, nuts and washers from M3 to M6.
- Three lanes about 21.7 mm wide that join at the spout.
- Sorting on a table and pouring into a box or into your palm.
Not made for
- Very small screws under M2, which would run out of the spout too fast.
- Bigger parts that jam the spout.
- Liquids, food and any load.
Screw Sorting Tray with a Spout
A shallow tray with three lanes for sorting screws and nuts. Through the spout on the side everything pours into a box.
€6.90incl. VAT
€5.61 excl. VAT
with delivery €17.80 · free delivery over €59.00
Colour: Black
The image is an illustration, we print in the colour you choose
Dimensions are per design. We have not yet checked it against real parts, so compare the dimensions with your own part. See what it is designed for
You pay for delivery once for the whole order. We deliver by courier to the address you enter in the order. Delivery country: Germany.
Product details
| Size of one piece | 119 × 72 × 14 mm |
|---|---|
| Pieces per pack | 1 |
| Material | PLA |
| Colours available | Black, White, Grey, Yellow, Red, Blue |
| Made for |
|
| Availability | Made to order |
What is in the pack
The pack has 1 piece. The tray is 119 x 72 x 14 mm.
How to use it
Spread the screws into the lanes by size. To pour, tilt the tray towards the spout. The spout narrows from 32 mm to a 14 mm opening.
Who it is for
For anyone with a mix of screws and nuts on the table who wants to sort them before putting them away. For a repairer who must return every type to its own box after taking something apart.
Good to know
The dividers are 9 mm tall, so with strong shaking the lanes get mixed. Hold the tray level. The bottom is not sloped, so tilt it by about 15 to 20 degrees or use a finger for the last pieces in a lane. The wall is thin. This is a light tray, not a drawer.
For companies
- The price per pack drops for larger quantities where our costs allow it; it is shown on each product. Larger orders are quoted separately.
- Invoice with VAT. A company in the EU with a valid VAT number receives the invoice without VAT (reverse charge).
- From 50 pieces we can put your text or logo on the parts. Tell us what you need.
- We confirm the delivery date with your order.
You may also need
You can add these pieces too.
Common questions
Do M6 screws pass through the spout?
Yes, the 14 mm opening lets screws and nuts from M3 to M6 through one by one. Bigger parts will jam it.
Do the lanes get mixed when I carry it?
They can, because the dividers are 9 mm tall. Hold the tray level.
Gridfinity is an open standard devised by Zack Freedman. Our stands and trays are our own, drawn to its dimensions.